Equipment PSU - Intersight Test

A Cisco equipment chassis managed by Cisco Intersight can be provided with one or more hot-swappable power supplies. As issues in the power supply units can adversely impact the performance of the blades in a chassis, administrators need to promptly detect power-related issues and rectify them before any irrepairable damage is done.

This test aids in the timely detection of issue with power supply by collection of key metrics like status of power supply, voltage and presence.

Target of the test : Cisco Intersight

Agent deploying the test : A remote agent

Outputs of the test : One set of results for each PSU managed by Cisco Intersight

Configurable parameters for the test
Parameter	Description
Test period	How often should the test be executed.
Host	The IP address of the Host
Port	The port number through which Cisco Intersight communicates.
API Key ID	Specify the ID for API key which is used to authenticate the eg Agent connectivity to Cisco Intersight.
API Key Filepath	Specify the filepath from where eG Agent can read the API Key.
URL	Specify the URL for Cisco Intersight. the default is intersight.com.
Proxy Host	Specify the IP address of the proxy host server.
Proxy Port	Specify the port number of the proxy host server.
Proxy User Name	The user name for the proxy server authentication.
Proxy Password	The password for the proxy server authentication.
Confirm Password	Specify the passowrd again.
Detailed Diagnoses	To make diagnosis more efficient and accurate, the eG Enterprise embeds an optional detailed diagnostic capability. With this capability, the eG agents can be configured to run detailed, more elaborate tests as and when specific problems are detected. To enable the detailed diagnosis capability of this test for a particular server, choose the On option. To disable the capability, click on the Off option. The option to selectively enable/disable the detailed diagnosis capability will be available only if the following conditions are fulfilled: The eG manager license should allow the detailed diagnosis capability Both the normal and abnormal frequencies configured for the detailed diagnosis measures should not be 0.

Measurements made by the test

Measurement

Description

Measurement Unit

Interpretation

Overall Status

Indicates the current status of PSU in the equipment chassis.

The Status reported by this measure and their corresponding numeric equivalents are described in the table below:

State	Numeric Value
Unknown	0
Operable	1
Inoperable	2
Degraded	3
Powered-off	4
Power-problem	5
Removed	6
Voltage-problem	7
Thermal-problem	8
Performance-problem	9
Accessibility-problem	10
Identity-unestablishable	11
Bios-post-timeout	12
Disabled	13
Fabric-conn-problem	51
Fabric-unsupported-conn	52
Config	81
Equipment-problem	82
Decommissioning	83
Chassis-limit-exceeded	84
Not-supported	100
Discovery	101
Discovery-failed	102
Identify	103
Post-failure	104
Upgrade-problem	105
Peer-comm-problem	106
Auto-upgrade	107

Note:

By default, this measure reports the above-mentioned Status while indicating the operating status of each PSU being managed. However, in the graph of this measure, states will be represented using their corresponding numeric equivalents only.

The detailed diagnosis of this measure provides the PSU Id, VID, Part number and revision.

Presence state

Indicates the presence status of PSU in equipment chassis.

The State reported by this measure and their corresponding numeric equivalents are described in the table below:

State	Numeric Value
Unknown	0
Empty	1
Equipped	10
Missing	11
Mismatched	12
Equipped-not-primary	13
Equipped-identity-unestablishable	20
Mismatch-identity-unestablishable	21
Inaccessible	30
Unauthorized	40
Not-supported	100

Note:

By default, this measure reports the above-mentioned States while indicating the presence of each PSU being managed. However, in the graph of this measure, states will be represented using their corresponding numeric equivalents only.

Voltage

Indicates the current voltage level of PSU being monitored.

Volts