Virtual Networks Test

This test auto discovers the virtual networks available in the KVM server and reports whether/not each virtual network is active over the network.

Target of the test : A KVM server

Agent deploying the test : An internal agent

Outputs of the test : One set of results for each virtual network that is to be monitored.

Configurable parameters for the test
Parameter Description

Test Period

How often should the test be executed.

Host

The IP address of the host for which this test is to be configured.

Port

The port at which the specified host listens.
Measurements made by the test
Measurement Description Measurement Unit Interpretation

Is active?

Indicates the current status of this virtual network i.e., indicates whether this virtual network is active over the network or not.

Percent

This test reports a value Yes if the virtual network is active and No if otherwise. This test also reports Error if the virtual networks encountered errros.

The numeric values that correspond to each of the Measure Values reported by this test are listed in the table below:

Measure Value Numeric Value
Yes 1
No 2
Error 3

Note:

By default, this measure reports one of the Measure values listed in the table above. The graph of this measure however, represents the current status of this virtual network using the numeric equivalents - ‘1’ to ‘3’.