Oracle RAC Defer Transactions Test

Oracle uses deferred transactions to propagate data-level changes asynchronously among master sites in an advanced replication system as well as from an updatable snapshot to its master table.

This test reports the number of deferred transactions in the shared cluster storage.

This test is disabled by default. To enable the test, go to the enable / disable tests page using the menu sequence : Agents -> Tests -> Enable/Disable, pick the Oracle Cluster as the desired Component type, set Performance as the Test type, choose the test from the disabled tests list, and click on the >> button to move the test to the ENABLED TESTS list. Finally, click the Update button.

Target of the test : Oracle Cluster

Agent deploying the test : An internal agent

Outputs of the test : One set of results for the Oracle cluster being monitored

Configurable parameters for the test
  1. TEST PERIOD - How often should the test be executed
  2. Host – The host for which the test is to be configured
  3. Port - The port on which the server is listening
  4. SCAN Name - SCAN stands for Single Client Access Name, it is a feature used in Oracle RAC environments that provide a single name for clients to access any Oracle Database running in the cluster. You can provide SCAN as an alternative to IP/Host Name. If this parameter value is provided, it will be used for connectivity otherwise IP/Hostname will be used.
  5. orasid - The variable name of the oracle instance

  6. service name - A ServiceName exists for the entire Oracle RAC system. When clients connect to an Oracle cluster using the ServiceName, then the cluster routes the request to any available database instance in the cluster. By default, the service name is set to none. In this case, the test connects to the cluster using the orasid and pulls out the metrics from that database instance which corresponds to that orasid. If a valid service name is specified instead, then, the test will connect to the cluster using that service name, and will be able to pull out metrics from any available database instance in the cluster.

    To know the ServiceName of a cluster, execute the following query on any node in the target cluster:

    select name, value from v$parameter where name =’service_names’

  7. User – In order to monitor an Oracle RAC, a special database user account has to be User – In order to monitor an Oracle database server, a special database user account has to be created in every Oracle database instance that requires monitoring. A Click here hyperlink is available in the test configuration page, using which a new oracle database user can be created. Alternatively, you can manually create the special database user. When doing so, ensure that this user is vested with the select_catalog_role and create session privileges.

    The sample script we recommend for user creation (in Oracle database server versions before 12c) for eG monitoring is:

    create user oraeg identified by oraeg create role oratest;

    grant create session to oratest;

    grant select_catalog_role to oratest;

    grant oratest to oraeg;

    The sample script we recommend for user creation (in Oracle database server 12c) for eG monitoring is:

    alter session set container=<Oracle_service_name>;

    create user <user_name>identified by <user_password> container=current default tablespace <name_of_default_tablespace> temporary tablespace <name_of_temporary_tablespace>;

    Grant create session to <user_name>;                                 

    Grant select_catalog_role to <user_name>;

    The name of this user has to be specified here.

  8. Password – Password of the specified database user
  9. Confirm password – Confirm the password by retyping it here.
  10. SSL- By default, this flag is set to No, as the target Oracle cluster is not SSL-enabled by default. If the target cluster is SSL-enabled, then set this flag to Yes.
  11. SSL Cipher-This parameter is applicable only if the target Oracle Cluster is SSL-enabled, if not, set this parameter to none. A cipher suite is a set of cryptographic algorithms that are used before a client application and server exchange information over an SSL/TLS connection. It consist of sets of instructions on how to secure a network through SSL (Secure Sockets Layer) or TLS (Transport Layer Security). In this text box, provide a comma-seperated list of cipher suites that are allowed for SSL/TLS connection to the target cluster. By default, this parameter is set to none.
  12. TRUSTSTORE FILE- This parameter is applicable only if the target Oracle Cluster is SSL-enabled, if not, set this parameter to none. TrustStore is used to store certificates from Certified Authorities (CA) that verify and authenticate the certificate presented by the server in an SSL connection. Therefore, the eG agent should have access to the truststore where the certificates are stored to authenticate and connect with the target cluster and collect metrics. For this, first import the certificates into the following default location <eG_INSTALL_DIR>/lib/security/mytruststore.jks. To know how to import the certificate into the truststore, refer toPre-requisites for monitoring Oracle Cluster. Then, provide the truststore file name in this text box. For example: mytruststore.jks. By default, none is specified against this text box.
  13. TRUSTSTORE TYPE-This parameter is applicable only if the target Oracle Cluster is SSL-enabled, if not, set this parameter to none.Specify the type of truststore that contains the certificates for server authentication in this text box. For eg.,JKS. By default, this parameter is set to the value none.
  14. TRUSSTORE PASSWORD-This parameter is applicable only if the target Oracle Cluster is SSL-enabled, if not, set this parameter to none. If a Truststore File name is provided, then, in this text box, provide the password that is used to obtain the associated certificate details from the Truststore File. By default, this parameter is set to none.
Measurements made by the test
Measurement Description Measurement Unit Interpretation

Defer transaction count:

Indicates the number of deferred transactions in the shared cluster storage.

Number

When the advanced replication facility pushes a deferred transaction to a remote site, it uses a distributed transaction to ensure that the transaction has been properly committed at the remote site before the transaction is removed for the queue at the local site. If transactions are not being pushed to a given remote site, verify that the destination for the transaction was correctly specified. If you specify a destination database when calling DBMS_DEFER_SYS.SCHEDULE_EXECUTION using the DBLINK parameter, or DBMS_DEFER_SYS.EXECUTE using the DESTINATION parameter, make sure the full database link is provided.