Tcp Traffic – OS Test

Since most popular applications rely on the TCP protocol for their proper functioning, traffic monitoring at the TCP protocol layer can provide good indicators of the performance seen by the applications that use TCP. The most critical metric at the TCP protocol layer is the percentage of retransmissions. Since TCP uses an exponential back-off algorithm for its retransmissions, any retransmission of packets over the network (due to network congestion, noise, data link errors, etc.) can have a significant impact on the throughput seen by applications that use TCP. This test monitors the TCP protocol traffic to and from a guest, and particularly monitors retransmissions.

Target of the test : Oracle VM Server

Agent deploying the test : A remote agent

Outputs of the test : One set of results for each powered-on VM of the Oracle VM Server being monitored.

Configurable parameters for the test
Parameters	Description
Test Period	How often should the test be executed.
Host	The host for which the test is to be configured.
Port	The port at which the specified Host listens. By default, this is NULL.
Oracle VM Manager, Oracle VM Manager User, Oracle VM Manager Password, and Confirm Password	This test remotely connects to the Oracle VM Manager that manages the monitored Oracle VM Server and uses the web services API of the Oracle VM Manager to pull out metrics of interest. To enable this test to communicate with the web services API, you first need to configure the test with the IP address or host name of the Oracle VM Manager. This can be done using the Oracle VM Manager text box. Then, you need to configure the test with the credentials of a user with Admin rights to the Oracle VM Manager. Use the Oracle VM Manager User and Oracle VM Manager Password parameters to configure these credentials. Finally, confirm the password by retyping it in the Confirm Password text box.
SSL	By default, the Oracle VM Manager is SSL-enabled. Accordingly, the SSL flag is set to Yes by default. This indicates that the eG agent will communicate with the Oracle VM Manager via HTTPS by default.
WebPort	By default,, the Oracle VM Manager listens on 7002. This implies that while monitoring an Oracle VM server via an SSL-enabled Oracle VM Manager, the eG agent, by default, connects to port 7002 of the Oracle VM Manager to pull out metrics. In some environments however, this default port may not apply. In such a case, against the WebPort parameter, you can specify the exact port at which the Oracle VM Manager in your environment listens so that the eG agent communicates with that port.
Exclude VMs	Administrators of some virtualized environments may not want to monitor some of their less-critical VMs - for instance, VM templates - both from 'outside' and from 'inside'. The eG agent in this case can be configured to completely exclude such VMs from its monitoring purview. To achieve this, provide a comma-separated list of VMs to be excluded from monitoring in the Exclude VMs text box. Instead of VMs, VM name patterns can also be provided here in a comma-separated list. For example, your exclude vms specification can be: xp,lin,win,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside and outside views of all VMs on a virtual host by default. By providing a comma-separated list of VMs/VM name patterns in the Exclude VMs text box, you can make sure the eG agent stops collecting 'inside' and 'outside' view metrics for a configured set of VMs.
Ignore VMs Inside View	Administrators of some high security Oracle environments might not have permissions to internally monitor one/more VMs. The eG agent can be configured to not obtain the 'inside view' of such ‘inaccessible’ VMs using the Ignore VMs Inside View parameter. Against this parameter, you can provide a comma-separated list of VM names, or VM name patterns, for which the inside view need not be obtained. For instance, your ignore vms inside view specification can be: xp,lin,win,vista. Here, the * (asterisk) is used to denote leading and trailing spaces (as the case may be). By default, this parameter is set to none indicating that the eG agent obtains the inside view of all VMs on an Oracle VM server by default. Note: While performing VM discovery, the eG agent will not discover the operating system of the VMs configured in the ignore vms inside view text box.
Inside View Using	By default, this test obtains the “inside view” of VMs using the eG VM Agent. Accordingly, the Inside view using flag is set to eG VM Agent by default. The eG VM Agent is a piece of software, which should be installed on every VM on a hypervisor. Every time the eG agent runs this test, it uses the eG VM Agent to pull relevant 'inside view' metrics from each VM. Once the metrics are collected, the eG agent then communicates with each VM agent and pulls these metrics, without requiring administrator privileges. Refer to Configuring the Remote Agent to Obtain the Inside View of VMs for more details on the eG VM Agent.
Domain, Admin User, and Admin Password, and Confirm Password	By default, these parameters are set to none. This is because, by default, the eG agent collects 'inside view' metrics using the eG VM agent on each VM. Domain administrator privileges need not be granted to the eG agent if it uses this default approach to obtain the 'inside view' of Windows VMs.
Ignore WINNT	By default, the eG agent does not support the inside view for VMs executing on Windows NT operating systems. Accordingly, the Ignore WINNT flag is set to Yes by default.

Measurements made by the test
Measurement	Description	Measurement Unit	Interpretation
Segments received by VM	Indicates the rate at which segments are received by the guest.	Segments/Sec
Segments sent by VM	Indicates the rate at which segments are sent to clients or other guests	Segments/Sec
Retransmits by VM	Indicates the rate at which segments are being retransmitted by the guest	Segments/Sec
Retransmit ratio from VM	Indicates the ratio of the rate of data retransmissions to the rate of data being sent by the guest	Percent	Ideally, the retransmission ratio should be low (< 5%). Most often retransmissions at the TCP layer have significant impact on application performance. Very often a large number of retransmissions are caused by a congested network link, bottlenecks at a router causing buffer/queue overflows, or by lousy network links due to poor physical layer characteristics (e.g., low signal to noise ratio). By tracking the percentage of retransmissions at a guest, an administrator can quickly be alerted to problem situations in the network link(s) to the guest that may be impacting the service performance.